1. Picture
2. Description
| Mechanical parts | 2.1 | Host width | 4000mm |
|---|---|---|---|
| 2.2 | Longitudinal guide rail length | 17000mm | |
| 2.3 | Flame single cutting torch | 1 group | |
| 2.4 | Automatic ignition | 1 group | |
| 2.5 | Capacitance height adjusting | 1 group | |
| 2.6 | Plasma cutting torch | 1group | |
| 2.7 | Arc height adjusting | 1group | |
| 2.8 | Contact location | 1group | |
| 2.9 | Anti collision device | 1group | |
| 2.10 | Driven type | Double sides | |
| 2.11 | Pipeline transmission mode | Transverse and longitudinal track | |
| Electric parts | 2.12 | Cnc system | Usa hypertherm micro edge |
| 2.13 | Driven system/motor | Panasonic | |
| 2.14 | Reducer | Germany sew | |
| 2.15 | Plasma source | Usa hypertherm max pro125 | |
| 2.16 | Automatic program, nesting software | Australia fastcam |
3. Machine parameters
| 3.1 | Effective cutting width | 3000mm |
| 3.2 | Effective cutting length | 13000mm |
| 3.3 | Flame cutting thickness | 6-150mm |
| 3.4 | Flame cutting speed | 5-750mm/min |
| 3.5 | Plasma cutting thickness | 25mm |
| 3.6 | Plasma drilling thickness | 20mm |
| 3.7 | Plasma cutting speed | 0-6000mm/min |
| 3.8 | Cutting torch raising space | 200mm |
| 3.9 | Machine running speed | 0-9000mm/min |
| 3.10 | Speed setting tolerance | ≤±5％ |
| 3.11 | Automatic height adjusting precision | ≤±0.1mm |
| 3.12 | Vertical line precision | ±0.2mm/10m |
| 3.13 | Total machine precision Side (4 sides)1000╳1000 Marking speed 500-800mm/min |  |
| 3.14 | Side (4 sides) | ±0.5mm |
| 3.15 | Diagonal error |ad-bc| | ±0.5mm |
| 3.16 | Return origin bias | ±0.2mm |
| 3.17 | Intersection deviation | ±0.5mm |
| 3.18 | Inverse linear deviation | ±0.2mm |
| 3.19 | Cutting plate surface quality (roughness)(as δ=25 plates) | Rz(um)=70+1.2a With eyes: roughness 12.5 |
| 3.20 | Verticality and angularity tolerance | Μ(mm)=0.4+0.015a, tool: angle ruler |
4. Machine running condition
| 4.1 | Source voltage/frequency | 3×380v±10%/50hz, 220v±10%/50hz |
| 4.2 | Input power | 3kw |
| 4.3 | Cutting oxygen pressure | 0.5-0.9 mpa |
| 4.4 | Pre head oxygen pressure | 0.4－0.6 mpa |
| 4.5 | Gas pressure | 0.05-0.1 mpa |
| 4.6 | Gas types | Acetylene, propane, propylene, natural gas. |
| 4.7 | Surrounding temperature | 0-50℃ |
| 4.8 | Relative humidity | <90% no condensation |
| 4.9 | Surround | Ventilation. No big impact |
5. Components
1. Cutting beam 1set
2. Flame cutting torch 1group
3. Plasma cutting torch 1group
4. Control cabinet 1group
5. Confluence 1group
6. Cutting table and hanging frame 1group
7. Beam rail 1group
8. Automatic programming, nesting software Australia fastcam 1set
9. Bearing beam foundation (charged by user)
